Chuck Shaffer (cshaffer@ns1.com)
Sun, 12 Sep 1999 11:08:29 -0700
Can anyone out there help me with quik on an ans 500?
I installed via ftp to an internal Seagate drive using Scott R. Every's
installer.1999.coff (from 8/17, I think) and then booted from a floppy
with
vmlinux.coff (8/23) using /dev/sda4 as my root partition.
I copied the vmlinux and System.map files to my /boot directory along
with a
copy of /etc/quik.conf. I edited /boot/quik.conf to the following:
timeout = 100
default = linux
image = /vmlinux
label = linux
root = /dev/sda4
image = /vmlinux
label = linux.old
root = /dev/sda4
Here's what I get when I try to run quik:
/sbin/quik -v -C /boot/quik.conf
Second-stage loader is on /dev/sda0
Config file is on partition 2
Fatal error: cannot open /dev/sda0
[[root@host101 /]# pdisk /dev/sda
Edit /dev/sda -
Command (? for help): p
Partition map (with 512 byte blocks) on '/dev/sda'
#: type name length base ( size )
1: Apple_partition_map Apple 63 @ 1
2: Apple_UNIX_SVR2 boot 79872 @ 64 ( 39.0M)
3: Apple_UNIX_SVR2 swap 262144 @ 79936 (128.0M)
4: Apple_UNIX_SVR2 / 3851978 @ 342080 ( 1.8G)
Device block size=512, Number of Blocks=4194058 (2.0G)
DeviceType=0x0, DeviceId=0x0
This archive was generated by hypermail 2.0b3 on Mon Sep 13 1999 - 06:16:22 GMT